Page 1 of 1

Posted: Fri May 25, 2012 10:07 am
by Beanfly
Hello There:

I'm trying to do a Mirror back up of my External Hard Drive "My Book" Drive (M)

I'm trying to tell it to Copy to the Destination of my other

External Hard Drive "My Book BU" Drive (N)
When i click Save and am taken back to the main Window of FBackup 4.7 My Destination is wrong.

My Destination is showing Drive (M) when I want it to be Drive (N)
Any Ideas?
Thank You


Posted: Mon May 28, 2012 3:50 pm
by Adrian (Softland)
Hi,
Are the external drives connected directly to PC? or to an USB hub?


Posted: Sun Jun 03, 2012 10:50 am
by Beanfly
There are Four external hard drives connected to my computer "All Together"

Two at 1T in size and two at 2T in size.
The 1T and 2T in size are connected directly to the Computer. (I store all my files on them)
The External Hard Drives That FBackup 4.7 Mirrors all my files to are Connected to a USB Hub

(none powered with 4 ports)

Connected to the USB Hub is Two External Hard Drives. 1T and 2T in size, Plus my Mouse and key board USE plug and one External CD drive
The 2T in size External Hard Drive that is not saving the settings is Connected to the USE Hub.

But The 1T in size External Hard Drive is Saving the settings, and It's Connected to the USE Hub as well..
Thank you Admin, Any Input would be great. ^_^


Posted: Sun Jun 03, 2012 11:01 pm
by Beanfly
Also I thought I would let you know, The External Hard Drive That is Connected to the USB Hub still shows up in my Computer, The one that is not saving right in FBackup 4.7, and I can move files to and from it. So it's a Working Drive as far as I know.
Thank you again


Posted: Wed Jun 06, 2012 6:10 pm
by Adrian (Softland)
Hi,
Do you have the same problem if you connect the drives directly to the USB ports of the computer?


Posted: Tue Jun 12, 2012 11:17 am
by Beanfly
Yes. I just tried it. It's still switching back to Drive (M) when I pick Drive (N)


Posted: Thu Jun 14, 2012 12:25 pm
by Adrian (Softland)
Hi,
Can you give me access to your computer using TeamViewer?

Send an email to info[at]fbackup[dot]com to fix a time.


Posted: Tue Jul 10, 2012 10:54 am
by Beanfly
I Can do that. Sorry for late reply, Was super busy with work. I'm free this weekend to do some remote support with you. I will e-mail you right away.
Thank you.